FFR Mark III Complete Kit : $19,990  
 
 

The Mk3 Complete kit gives you everything you need to build your car, in one big package. The only things you’ll need are the engine/transmission, wheels/tires, and a paint job.

When we say everything, we mean it. We include little things like wipers, hood hinges, and we even powder coat the chassis standard. We make it easy for you to use the engine of your choice with a list of available (no charge) headers and motor/trans mount assemblies.

 
 
  • What You Get
  • What You Need
What You Get:

The Mk3 Complete kit gives you everything you need to build your car, in one big package. The only things you’ll need are the engine/transmission, wheels/tires, and a paint job. When we say everything, we mean it. We include little things like wipers, hood hinges, and we even powder coat the chassis standard. We make it easy for you to use the engine of your choice with a list of available (no charge) headers and motor/trans mount assemblies.

Here’s a list of what comes standard in the Mk3 Complete Kit.

Frame:

Complete jig-welded original style 4” round tube frame. Includes all mounts ready to accept small block Ford and 1987-2004 Mustang running gear. Kit can be ordered to accept a wide variety of engines/suspensions.
Comes powdercoated in gloss black
Includes three point roll bar powdercoated to match
Includes mounts to accept passenger side roll bar.

Body:

Hand laid 3/16” laminate composite body and panels made with vinylester resin.
Driver and Passenger doors with new molded door liners
Hood with new molded hood liner, and centered hood scoop
Trunk with new molded trunk liner and improved mount face for lic plate light.
Includes secondary body fasteners assembly.
Adhesive backed and foam weatherstrip
C-channel door edge trim and fasteners
Plastic end caps and body u-nut fasteners
Trunk and engine bay seal, push on rubber bulb seal
Rubber hood and trunk bumpers
Includes multi-adjustable door hinges with bronze bushings w/fasteners
Includes vintage trunk hinge kit, hinge support plates and fasteners
Includes hood hinge kit with hydraulic piston supports and fasteners Includes original design quick-jack competition bumpers w/stainless steel sleeves and fasteners.

Chassis Aluminum Panels:

Includes over 40 CNC cut, pre-formed 6061-T6 aluminum panels for cockpit, trunk, and engine bay.
1200 pre-packaged rivets1/8” short & long, 3/16” short & long
Complete Mk3 cockpit aluminum with optional block-off plates and patch covers
Engine bay aluminum assembly with aluminum nose sections and splash guards
Aluminum trunk liner has been replaced by molded trunk liner

Complete Front Suspension:

Unequal length a-arm control arms with coil-over shock suspension. Comes complete with all parts and fasteners.
Koni brand high performance mono-tube, rod-end shock absorbers
Coil-over kit for Koni dampers including spring hat, threaded seat and 500lb. black powdercoated performance springs
Adjustable upper control arms with ball joints and fasteners
Lower tubular control arms with ball joints and fasteners
Grade-8 mounting hardware.

Complete Rear Suspension:

High-end 3-link deluxe rear suspension with new Ford Racing 8.8” rear solid axle/differential with posi-traction and 3.55 gears. Comes with all fasteners and hardware required to install.
Factory New Ford Racing 8.8” posi solid axle rear end w/3.55:1 gears in 59.25” width (87-93 size), 5-lug.
FFR Deluxe 3-Link suspension kit w/rear-end brackets, upper link kit, and fasteners, including pan-hard bar kit w/rod-ends and gr8 fasteners.
Koni brand high performance mono-tube, rod-end shock absorbers
Coil-over kit for Koni dampers including spring hat, threaded seat and 350lb. black powdercoated performance springs
Factory Five tubular rear lower control arms, w/polyurethane bushings and fasteners

Complete Front/Rear Brake Kit:


S/N 95 style spindles and spindle adapter bracket w/fasteners
Front hubs, fasteners and dust covers
Front Brakes, Ford GT 11” front rotors w/twin piston calipers, brake pads and fasteners
Rear Brakes, Ford 10.5” rear rotors w/calipers, brake pads, slider and caliper axle mount brackets, and fasteners.
Master cylinder (listed in pedal box assembly), stainless braided brake line, front and rear w/mount clips, banjo bolts and brake line mounting fasteners
Pre-flared 3/16” brake line and brake line T-adapter
OEM Ford Mustang emergency brake handle, fasteners and cable

Complete Steering System:

Complete steering system using 15:1 manual rack from tie rod ends and fasteners to vintage steering wheel and badges. Collapsible design.
15:1 Manual steering rack w/inner and outer tie rod ends and fasteners
Polyurethane steering rack bushings and fasteners
Steering rack shaft adapter 9/16-26 spline
Nickel plated lower steering shaft (fully welded u-joints)
Collapsible upper steering shaft, w/friction washers
14” Vintage wood and aluminum steering wheel w/boss and ceramic F5R center section and fasteners
Steering bearings and hardware, including flange bearing, pillow block bearing and fasteners

Complete Fuel System/Parts:

Based on OEM style fuel tank and system, this assembly provides everything from the gas cap to the lines, and is designed to work with carburetors or fuel injection systems. External fuel pump required.
OEM style fuel tank w/mounting straps and hardware, vents, gaskets, pick-up and fuel level sending unit
Fuel lines, connectors, filler neck and fasteners
Pre-flared fuel lines (1/4” and 5/16”) w/unions, barbs, hose clamps and high press flex lines and fasteners
Aston LeMans style polished aluminum fuel cap with integral pressure cap, gaskets, ground strap, fuel hose to tank w/fasteners.
3/8” line fuel filter, connectors and hose clamps

Complete Cooling System/Parts:

Electric cooling fan and mounting hardware, extensions for radiator hoses, and all necessary fasteners.
Electric cooling fan and mounting kit w/connectors
Aluminum radiator w/cap and in-line filler neck
Radiator mount kit and fasteners
Stainless Steel radiator hose kit incl. adapter kit, fasteners and hose
Overflow tank w/cap, hoses, hose clamps and mounting hardware
185 degree thermostat switch and wiring

Engine Accessories/Side Exhaust/Mounts:

The Mk3 Complete kit is configured to accommodate the engine of your choice. Select from full tubular 4-into-4-into 1 headers and side exhaust, engine and transmission mounts.
Engine/Transmission mounts (select 302/351 or 4.6L, or 390/427/428, or 429/460), with fasteners
Exhaust, with gaskets and fasteners. Select from
87-95 straight pipes
96-04 straight pipes
302 Headers, ceramic coated
351 Headers, ceramic coated
390/427/428 Headers, ceramic coated
429/460 Headers, ceramic coated
87-95 Catalytic converters w/air hose, check valve, T-hose fitting
96-04 Catalytic converters
4.6L 2-Valve Headers, ceramic coated
4.6L 4-Valve Headers, ceramic coated
Side Exhaust, bare steel w/rubber hanger brackets, gaskets and fasteners

Driveshaft:

Select from one of three available driveshafts w/fasteners to match the engine/trans of your

choice. Select one of the following…
28 spline 10.375” driveshaft for T-5 or Tremec 3550’s
31 spline 10.375” driveshaft for Tremec TKO 500 or 600’s
31 spline 12.875” driveshaft for 4.6L engines w/T-45’s or 3650’s

Gauges and Dash and Electrical Assembly:

End those wiring harness woes, integrated harness and electronic gauges are just the start of this massive assembly. Choose either vintage/replica or modern/ performance gauges to complement an authentic 427 street style dash. Complete assembly comes with covered aluminum dash, dash buttons, toggles and indicator lights, switches, and horn.
Mk3 pre-cut 427 style aluminum dashboard w/fasteners
Padded dash cover, black vinyl
Custom fit chassis wiring harness
Ignition switch and F5R key, headlight switch, 3-position turn signal switch, starter solenoid and horn.
Dash indicators, Red, Green, Blue dash lights
Wiring harness mounting kit and hardware incl. Fuse panel mount
Insulated line clip hardware and fasteners
Cable ties, wire loom and flex grommeting
On/Off switch, horn button, flasher and all connectors
Battery ground strap
Battery Box and Relocation Kit: Trunk mounted battery box, cables and hold-downs with fasteners.
Speedometer sending unit, pigtail, fasteners and 3.55 gear
Choose a complete set of 7 Autometer Ultra-Light electronic gauges, w/connectors, terminals and installation kit. Includes the following gauges:

Speedometer
Tachometer
Oil Pressure Gauge
Water Temperature Gauge
Fuel Level Gauge
Voltmeter
Oil Temperature Gauge

OR Select

Complete set of 7 vintage F5R Replica gauges w/connectors, terminals and installation kit includes
Speedometer, reverse read
Tachometer
Oil Pressure Gauge
Water Temperature Gauge
Fuel Level Gauge
Voltmeter
Clock

Complete Interior Accessories:

The Mk3 Complete kit comes with all the interior accessories you need and want. Authentic 427 seats, door latches, toggles, rear view mirror, and more complement the dash and gauges assembly for a full interior that is period correct. Check out this full list of standard parts and assemblies.

Authentic 427 roadster metal framed seats, black vinyl w/fasteners
5-point Simpson Brand harnesses. 3” wide driver and passenger, frame mounted w/fasteners
Complete cockpit carpet set, black all-weather
Emergency brake boot, black vinyl
Authentic interior rear view mirror w/fasteners
Full 7-gauge electronic F5R Vintage gauges or Autometer Ultra-Lite gauges (see description above in gauge assembly)
Original style door latches, fasteners and leather check straps
Authentic stainless shifter handle, shift knob, boot, polished ring and fasteners
Authentic 14” wood and aluminum steering wheel (listed in steering assembly), w/polished aluminum boss and small center badge.

Exterior Accessories and Lighting:

Along with the goodies on the inside of the car, the Mk3 complete kit is loaded with the right exterior parts and trim on the outside. Wiper kit, complete original style cable-drive Lucas wiper kit includes motor, wheelbox, ferrules, arms, blades, dash switch, wiring and connectors/fasteners
Wiper hole drilling kit and installation kit
Authentic Chrome-on-Brass vintage windscreen, tinted with side bars and fasteners. DOT safety glass compliant
Authentic 427 three-lock set including T-trunk handle, L-shaped hood handles, matching keys, cam wedges, fasteners, latch pin sleeves and plastic end cap
Authentic license plate light and bracket with fasteners
Authentic 3.5” Aston roller gas cap, polished cast aluminum with adaptor kit and all fasteners.
Competition hood pins.
High quality laser-cut aluminum side louvers.
Ceramic F5R badging nose and tail
Original style headlamp assemblies, including buckets, halogen headlamps, trim rings, and fasteners (DOT approved).
Original style British front amber turn signals, and red rear tail-lights
All lighting is DOT approved.

Complete Pedal Box and Components:

Leaving the Mustang pedal box behind, the complete Mk3 kit utilizes the proven Wilwood brand pedal box w/fasteners and all the required ancillary parts.
Wilwood pedal box and mounting hardware
Master Cylinders, clutch quadrant, clutch cable, threaded firewall adjuster
Accelerator pedal, accelerator cable, return spring and ball stud retainer, w/fasteners
Brake line adapters and T-fittings

Oil Filter Re-locater/Alternate Drive Pulley Assemblies:

A cool oil filter relocate kit comes with all hoses and hardware. Other parts to help 302 EFI and Mustang engine users include…
Oil filter relocate mount with fittings, hoses, barbs and fasteners
Spin-on engine block adapter
Alternate drive pulley, spacer, pulley wheel and fasteners
Air filter, conical
Fan belt, six rib

87-95 Mk3 Roadster Assembly Manual:

Bound assembly manual that is over 200 pages long.

Fasteners:

Over 1500 top quality zinc plated, chrome and stainless steel USS and SAE fasteners, numbered and packed individually by assembly.

What You Need:

Engine and Transmission

Wheels and Tires

Paint

Fuel pump

 

 
 
Copyright 2008 © Cobra Montreal